A Gardener's Notebook with Douglas E. Welch

I recorded this in response to a comment on a video I posted to The Greenhouse, the online home for Gardenfork,tv. Find more videos like this on The Green House iPod Ready Movie

Eric Rochow, over at Real World Green recently posted a video on using water timers for your sprinkling systems. The timer he showed in the video looked to be a volume-based time, measuring gallons instead of time. I have found that these work OK with traditional lawn sprinklers, but not so well with my drip and soaker systems, which use dramatically lower water pressure. Instead, I use these clockwork water timers, from Gardena. Using timers like these, along with drip and soaker irrigation, ease the tedious job of watering, put the water exactly where it is needed and prevent you from forgetting that you have left the sprinklers on -- running up your water bill. You can watch Eric's original video below my reply. Douglas' Reply iPod Ready Video Eric's Original Video

Eric Rochow, over at Real World Green recently posted a video on using water timers for your sprinkling systems. The timer he showed in the video looked to be a volume-based time, measuring gallons instead of time. I have found that these work OK with traditional lawn sprinklers, but not so well with my drip and soaker systems, which use dramatically lower water pressure. Instead, I use these clockwork water timers, from Gardena. Using timers like these, along with drip and soaker irrigation, ease the tedious job of watering, put the water exactly where it is needed and prevent you from forgetting that you have left the sprinklers on -- running up your water bill. You can watch Eric's original video below my reply. Douglas' Reply iPod Ready Video Eric's Original Video

Time to remove a small pine tree that was in the wrong spot in the garden. This is a continuation of the "editing" since we bought this house 12 years ago. I had to go out and buy a bow saw to complete this job. My wife, Rosanne, had trimmed off all the limbs., but couldn't get through the trunk. It was quick work once I had the right tool. All the debris from the tree was run through out chipper/shredder and the mulch is already spread on the tomato and rose beds. Not a bad days work overall. iPod Ready Video

Time to remove a small pine tree that was in the wrong spot in the garden. This is a continuation of the "editing" since we bought this house 12 years ago. I had to go out and buy a bow saw to complete this job. My wife, Rosanne, had trimmed off all the limbs., but couldn't get through the trunk. It was quick work once I had the right tool. All the debris from the tree was run through out chipper/shredder and the mulch is already spread on the tomato and rose beds. Not a bad days work overall. iPod Ready Video

We were visiting friends today -- sitting around the pool and munching on summer foods -- and their roses caught my eye. I spent a few minutes capturing the video for this montage, just wandering from bush to bush and taking it all in. iPod Ready Video

We were visiting friends today -- sitting around the pool and munching on summer foods -- and their roses caught my eye. I spent a few minutes capturing the video for this montage, just wandering from bush to bush and taking it all in. iPod Ready Video

iPod Ready Video

iPod Ready Video

It seems the wildfire season is starting early this year here in California, so I am posting (what seems to be) my yearly posting on California Wildfire Information available via the web. These services provide detailed information including fire perimeters, weather info and more. I will update this regularly as I locate new resources for the coming year. Looking back, I see that I have re-posted this entry almost every year since 2003. Geomac Wildland Fire Support Wildfire Viewer California Wildfire Information - California Wildfire Alliance Firescope Wildfire Information FireDetect from NOAA Satellite and Information Service CalFires.com - Fire Season 2008 Reports Simi Valley Fire Timelapse Video 2005 Firestorm from powrslave on Vimeo.

It seems the wildfire season is starting early this year here in California, so I am posting (what seems to be) my yearly posting on California Wildfire Information available via the web. These services provide detailed information including fire perimeters, weather info and more. I will update this regularly as I locate new resources for the coming year. Looking back, I see that I have re-posted this entry almost every year since 2003. Geomac Wildland Fire Support Wildfire Viewer California Wildfire Information - California Wildfire Alliance Firescope Wildfire Information FireDetect from NOAA Satellite and Information Service CalFires.com - Fire Season 2008 Reports Simi Valley Fire Timelapse Video 2005 Firestorm from powrslave on Vimeo.

It seems the wildfire season is starting early this year here in California, so I am posting (what seems to be) my yearly posting on California Wildfire Information available via the web. These services provide detailed information including fire perimeters, weather info and more. I will update this regularly as I locate new resources for the coming year. Looking back, I see that I have re-posted this entry almost every year since 2003. Geomac Wildland Fire Support Wildfire Viewer California Wildfire Information - California Wildfire Alliance Firescope Wildfire Information FireDetect from NOAA Satellite and Information Service CalFires.com - Fire Season 2008 Reports Simi Valley Fire Timelapse Video 2005 Firestorm from powrslave on Vimeo.

The Troy-Bilt TB154 Electric CultivatorListen to this review Our garden is fairly unique for the San Fernando Valley area of Los Angeles. We have no lawn at all, 5 mature trees and many smaller ones. This means that instead of lawn clippings we are constantly dealing with piles of leaves and limbs from both the deciduous and evergreen trees. We regularly fill both our compost bins and our one garden waste bin every week. If we have to do a major cleanup or pruning, we often have leaf piles lying around until trash day and it can even take 2-3 weeks to get rid of it all. Enter Troy-Bilt. Someone at the company came across A Gardener's Notebook and was kind enough to offer up a Chipper Shredder unit to review. I knew immediately that I could certainly put a chipper shredder through its paces. We still had a ton of leaves and limbs from the Fall, so we started gathering everything together in anticipation of its arrival. The Troy-Bilt CS 4265 2-in-1 Chipper Shredder arrived a little over a week later on a small pallet. My wife, who accepted delivery could not believe the size of the box and it took a little maneuvering to get it from the driveway to the back garden. The delivery waybill estimated the weight at about 200 lbs. I haven't used a gasoline-powered piece of equipment for years, although at one time in my life I could strip and re-assemble lawn mower engines (and still have them work!). First, I had to go purchase a gas can and some gas. Then I sat on the couch and read the extensive manuals -- one for the engine itself and another for the chipper shredder unit. Everyone I mentioned the unit to immediately made some "Fargo" comment (See IMDB for more info if you've never seen it), and this reminded me to be smart and careful before I used the chipper shredder. ...I think it is going to find a permanent place in my garden. This is an impressive piece of equipment for someone who hasn't started a lawnmower in over 20 years. It is quite large and does take up a significant amount of storage space, We are clearing out a space in the garden shed for it, but getting it into and out of the garage through a common 3' door was a challenge. The discharge chute extends quite far on one side, so I had to move it through the door sideways, leading with the chute and then turning the rest of the unit through the door. The inflated rubber tires allowed the unit to easily move whether in the garden or on pavement. Setting up the unit for the first time was straightforward as virtually everything you need is included. There is a heavy duty bag that can be attached to the discharge chute, goggles and the first filling of oil for the engine. You will want a long necked funnel to fill the engine as it is very difficult to pour into the fill cap with a standard bottle. I ended up making one with an existing funnel and a bit of plastic tubing. The gas tank is situated front and center and was easily filled using my new drip-proof gas can. Setting the choke, throttle and pulling the starter handle was all it took to get the unit to work. The 205cc motor started on the first pull with a slow chug-chug-chug, but quickly spun up to an impressive roar. The unit is loud, so ear protection is highly recommended. It sounds like a dangerous machine and should be treated as such. For our first test, we had a collection of old, dry limbs from a previous pruning project that never made it into the garden bins. They were quite long and we hadn't taken the time to cut them into smaller sections for the bin. The opening for feeding limbs on the chipper shredder is sized so that you can't feed in limbs larger than the recommended size. This is a wise design choice, but it can prevent you from feeding in limbs with odd bends or crooks. You will have to cut them into more manageable sections. These limbs were quite dry and seemed to vibrate in my hand a lot as I fed them through. Quite frequently, as I reached the end of a limb, smaller fragments would be ejected from the feed tube. It wasn't a large problem, but definitely another reminder of the importance of eye protection. The chips produced by the chipper shredder were excellent. They resembled course sawdust and would be a great addition to the compost pile or used as mulch on your flower beds. The unit showed no signs of laboring or stalling even as the limbs reached the maximum rated size. The second test was shredding up an entire garden bin of leaves. These leaves were fairly dry and loosely packed. Dumping the leaves into the feeder by handfuls worked well with no signs of bogging down or stalling. Pouring leaves from a bin directly into the unit was more hit and miss as it is more difficult to control the flow of leaves. Shredding dry leaves did generate a lot of dust which billowed out of the collection sack and coated the ground for about 7'-8' around. The dry leaves probably caused more dust than fresh leaves would, but I highly recommend wearing a dust mask when shredding leaves. Again, though, the mulch produced was excellent. One issue that worried me when getting this unit is that our garden paths are covered in pebbles. Raking and blowing leaves picked up a number of pebbles no matter how careful you are. Rocks and pebbles can quickly dull the blades so I wanted to be as careful as possible. Even so, I am sure I heard an occasional stone go through the unit. While it is certainly not advisable to put stones through it, it seemed to handle the occasional pebble with no ill effects. When the unit first arrived, I thought that it might be a bit large for my use, but after seeing how much it reduced the volume of our garden waste and the high quality mulch it produced, I think it is going to find a permanent place in my garden. Link: Troy-Bilt CS 4265 2-in-1 Chipper Shredder Specs and Information at TroyBilt.com

The Troy-Bilt TB154 Electric CultivatorListen to this review Our garden is fairly unique for the San Fernando Valley area of Los Angeles. We have no lawn at all, 5 mature trees and many smaller ones. This means that instead of lawn clippings we are constantly dealing with piles of leaves and limbs from both the deciduous and evergreen trees. We regularly fill both our compost bins and our one garden waste bin every week. If we have to do a major cleanup or pruning, we often have leaf piles lying around until trash day and it can even take 2-3 weeks to get rid of it all. Enter Troy-Bilt. Someone at the company came across A Gardener's Notebook and was kind enough to offer up a Chipper Shredder unit to review. I knew immediately that I could certainly put a chipper shredder through its paces. We still had a ton of leaves and limbs from the Fall, so we started gathering everything together in anticipation of its arrival. The Troy-Bilt CS 4265 2-in-1 Chipper Shredder arrived a little over a week later on a small pallet. My wife, who accepted delivery could not believe the size of the box and it took a little maneuvering to get it from the driveway to the back garden. The delivery waybill estimated the weight at about 200 lbs. I haven't used a gasoline-powered piece of equipment for years, although at one time in my life I could strip and re-assemble lawn mower engines (and still have them work!). First, I had to go purchase a gas can and some gas. Then I sat on the couch and read the extensive manuals -- one for the engine itself and another for the chipper shredder unit. Everyone I mentioned the unit to immediately made some "Fargo" comment (See IMDB for more info if you've never seen it), and this reminded me to be smart and careful before I used the chipper shredder. ...I think it is going to find a permanent place in my garden. This is an impressive piece of equipment for someone who hasn't started a lawnmower in over 20 years. It is quite large and does take up a significant amount of storage space, We are clearing out a space in the garden shed for it, but getting it into and out of the garage through a common 3' door was a challenge. The discharge chute extends quite far on one side, so I had to move it through the door sideways, leading with the chute and then turning the rest of the unit through the door. The inflated rubber tires allowed the unit to easily move whether in the garden or on pavement. Setting up the unit for the first time was straightforward as virtually everything you need is included. There is a heavy duty bag that can be attached to the discharge chute, goggles and the first filling of oil for the engine. You will want a long necked funnel to fill the engine as it is very difficult to pour into the fill cap with a standard bottle. I ended up making one with an existing funnel and a bit of plastic tubing. The gas tank is situated front and center and was easily filled using my new drip-proof gas can. Setting the choke, throttle and pulling the starter handle was all it took to get the unit to work. The 205cc motor started on the first pull with a slow chug-chug-chug, but quickly spun up to an impressive roar. The unit is loud, so ear protection is highly recommended. It sounds like a dangerous machine and should be treated as such. For our first test, we had a collection of old, dry limbs from a previous pruning project that never made it into the garden bins. They were quite long and we hadn't taken the time to cut them into smaller sections for the bin. The opening for feeding limbs on the chipper shredder is sized so that you can't feed in limbs larger than the recommended size. This is a wise design choice, but it can prevent you from feeding in limbs with odd bends or crooks. You will have to cut them into more manageable sections. These limbs were quite dry and seemed to vibrate in my hand a lot as I fed them through. Quite frequently, as I reached the end of a limb, smaller fragments would be ejected from the feed tube. It wasn't a large problem, but definitely another reminder of the importance of eye protection. The chips produced by the chipper shredder were excellent. They resembled course sawdust and would be a great addition to the compost pile or used as mulch on your flower beds. The unit showed no signs of laboring or stalling even as the limbs reached the maximum rated size. The second test was shredding up an entire garden bin of leaves. These leaves were fairly dry and loosely packed. Dumping the leaves into the feeder by handfuls worked well with no signs of bogging down or stalling. Pouring leaves from a bin directly into the unit was more hit and miss as it is more difficult to control the flow of leaves. Shredding dry leaves did generate a lot of dust which billowed out of the collection sack and coated the ground for about 7'-8' around. The dry leaves probably caused more dust than fresh leaves would, but I highly recommend wearing a dust mask when shredding leaves. Again, though, the mulch produced was excellent. One issue that worried me when getting this unit is that our garden paths are covered in pebbles. Raking and blowing leaves picked up a number of pebbles no matter how careful you are. Rocks and pebbles can quickly dull the blades so I wanted to be as careful as possible. Even so, I am sure I heard an occasional stone go through the unit. While it is certainly not advisable to put stones through it, it seemed to handle the occasional pebble with no ill effects. When the unit first arrived, I thought that it might be a bit large for my use, but after seeing how much it reduced the volume of our garden waste and the high quality mulch it produced, I think it is going to find a permanent place in my garden. Link: Troy-Bilt CS 4265 2-in-1 Chipper Shredder Specs and Information at TroyBilt.com

An update on the tomato plants we put in the ground the 2nd week of April -- San Marzano, Sprite and Legend varieties. iPod Ready Video

An update on the tomato plants we put in the ground the 2nd week of April -- San Marzano, Sprite and Legend varieties. iPod Ready Video

iPod Ready Video

iPod Ready Video

The Troy-Bilt TB154 Electric CultivatorListen to this review Watch video of the cultivator in use When I moved to Los Angeles 22 years ago, I left behind my grandmother's ½ acre garden and our own ¼ acre plot behind the house. I thought little of gardening for almost 10 years. Some people are good with houseplants. I am not one of them. So gardening was fondly remembered as something I did way back when. It seemed like everyone in my hometown (New London, Ohio, pop. 2600) tended a garden and I spent my childhood with a hoe in my hand, riding a lawn mower, behind huge rototillers and eventually driving tractors around our small farm. Finally, twelve years ago we purchased our first home and inherited a 10 year old, quite mature, garden. My wife and I typically tended the garden with shovel and hoe, but when I received an offer from Troy-Bilt to review some of their products, I jumped at the opportunity. We have a variety of beds on the property and after 12 years they could all use a bit of TLC. I thought an electric cultivator could help a lot. The Troy-Bilt TB145 Electric Cultivator(Click to get more info from the Troy-Bilt web site) arrived in a box about 4'x 2' we found on the porch one day after returning from Little League practice. I was eager to try it out, so like a typical user, I opened it up, set the owner's manual aside (of course) and put the cultivator to use. The only assembly required was attaching the handle, which took about 5 minutes and no tools. The first task was a rose bed that, after being dug up for a sewer line replacement, was buried in tall grass. I had used a hoe to clean out the bed once already and couldn't face doing it by hand again. Thankfully this tool arrived just in time. I was immediately surprised by the power in this small electric unit. I could easily pick it up with one hand, but it was cutting through the grass and quickly cultivating the bed to to 6" or more. Since it is so small, maneuvering it around the existing rose bushes was no problem. The bed itself is probably only about 3 feet wide, bordered by a cement block wall on one side and rustic wooden edging on the other. The long grass would occasionally wind up around the tines, but the cultivator is designed with quick release pins on each end that allowed me to simply pull off the tines, remove the grass and get right back to work. Managing the electrical cord is always a concern with a device like this. (I have cut the extension cord with my hedge trimmers at least 3 times (!!!). The cable management is well designed with a simple clip to hold the extension cord towards the back of the unit and along the handle so it is always in your sight and within easy reach of your hands. For me, personally, this is a great unit that fits well with my environment and I already have 4-5 more jobs waiting for it. The next weekend we brought out the cultivator to work up another small bed where we planned to put some tomato plants. I had picked up 3 seedlings from Tomatomania (Watch the video) in nearby Encino and was eager to get them, and a small pot of basil, into the ground. This bed was even narrower than the first and surrounded by cement on two sides and the stucco of the house on the other. I thought about taking the outside tines off the unit, but the full width ended up being fine. On this bed, I first laid out about 6 cubic feet of compost recently harvested from our old compost bin and then used the cultivator to work this into the existing soil. Again, the unit did a great job and quickly we had a nice, fluffy bed for the tomatoes. The tines handled the inevitable contact with the edges of the cement driveway with no ill effects. The blades showed no damage and simply bounced off the cement. Overall, the cultivator works well as an all-purpose cultivator for a small to medium-sized garden. Those with large expanses of open garden would probably opt for a bigger, gas-powered unit. The TB145 would also be an excellent "second machine" for small beds and hard to reach areas such as annual beds, shrub beds and cultivating between rows in a small vegetable garden. For me, personally, this is a great unit that fits well with my environment and I already have 4-5 more jobs waiting for it. Link: Troy-Bilt TB154 Electric Cultivator Specs and Information at TroyBilt.com

The Troy-Bilt TB154 Electric CultivatorListen to this review Watch video of the cultivator in use When I moved to Los Angeles 22 years ago, I left behind my grandmother's ½ acre garden and our own ¼ acre plot behind the house. I thought little of gardening for almost 10 years. Some people are good with houseplants. I am not one of them. So gardening was fondly remembered as something I did way back when. It seemed like everyone in my hometown (New London, Ohio, pop. 2600) tended a garden and I spent my childhood with a hoe in my hand, riding a lawn mower, behind huge rototillers and eventually driving tractors around our small farm. Finally, twelve years ago we purchased our first home and inherited a 10 year old, quite mature, garden. My wife and I typically tended the garden with shovel and hoe, but when I received an offer from Troy-Bilt to review some of their products, I jumped at the opportunity. We have a variety of beds on the property and after 12 years they could all use a bit of TLC. I thought an electric cultivator could help a lot. The Troy-Bilt TB145 Electric Cultivator(Click to get more info from the Troy-Bilt web site) arrived in a box about 4'x 2' we found on the porch one day after returning from Little League practice. I was eager to try it out, so like a typical user, I opened it up, set the owner's manual aside (of course) and put the cultivator to use. The only assembly required was attaching the handle, which took about 5 minutes and no tools. The first task was a rose bed that, after being dug up for a sewer line replacement, was buried in tall grass. I had used a hoe to clean out the bed once already and couldn't face doing it by hand again. Thankfully this tool arrived just in time. I was immediately surprised by the power in this small electric unit. I could easily pick it up with one hand, but it was cutting through the grass and quickly cultivating the bed to to 6" or more. Since it is so small, maneuvering it around the existing rose bushes was no problem. The bed itself is probably only about 3 feet wide, bordered by a cement block wall on one side and rustic wooden edging on the other. The long grass would occasionally wind up around the tines, but the cultivator is designed with quick release pins on each end that allowed me to simply pull off the tines, remove the grass and get right back to work. Managing the electrical cord is always a concern with a device like this. (I have cut the extension cord with my hedge trimmers at least 3 times (!!!). The cable management is well designed with a simple clip to hold the extension cord towards the back of the unit and along the handle so it is always in your sight and within easy reach of your hands. For me, personally, this is a great unit that fits well with my environment and I already have 4-5 more jobs waiting for it. The next weekend we brought out the cultivator to work up another small bed where we planned to put some tomato plants. I had picked up 3 seedlings from Tomatomania (Watch the video) in nearby Encino and was eager to get them, and a small pot of basil, into the ground. This bed was even narrower than the first and surrounded by cement on two sides and the stucco of the house on the other. I thought about taking the outside tines off the unit, but the full width ended up being fine. On this bed, I first laid out about 6 cubic feet of compost recently harvested from our old compost bin and then used the cultivator to work this into the existing soil. Again, the unit did a great job and quickly we had a nice, fluffy bed for the tomatoes. The tines handled the inevitable contact with the edges of the cement driveway with no ill effects. The blades showed no damage and simply bounced off the cement. Overall, the cultivator works well as an all-purpose cultivator for a small to medium-sized garden. Those with large expanses of open garden would probably opt for a bigger, gas-powered unit. The TB145 would also be an excellent "second machine" for small beds and hard to reach areas such as annual beds, shrub beds and cultivating between rows in a small vegetable garden. For me, personally, this is a great unit that fits well with my environment and I already have 4-5 more jobs waiting for it. Link: Troy-Bilt TB154 Electric Cultivator Specs and Information at TroyBilt.com

Scenes from this weekend's Tomatomania here in Encino, California Link: iPod Ready Video

Scenes from this weekend's Tomatomania here in Encino, California Link: iPod Ready Video

iPod Ready Video

iPod Ready Video

I must say I have been fairly tempted to take some illicit cuttings as I walk through my neighborhood. iPod Ready Video

I must say I have been fairly tempted to take some illicit cuttings as I walk through my neighborhood.

This is a neat, little piece of technology...a wind and solar power generator that can charge your iPod, cell phone and a host of other electronic gadgets. If you have a little wind in your garden, this could be an interesting way to keep your iPod playing A Gardener's Notebook podcasts the whole day through. (SMILE) Here is a video from Treehugger.com GREEN DEETS 014 Greener Gadgets Hymini from George Spyros on Vimeo.

We finally get the lavender bed planted!

Compost is finally ready here in the Welch garden and my ad hoc compost sifter isn't doing too bad of a job.

Who says it never rains in Southern California?